Scanning To Usb Memory - Muratec MFX-2590 Quick Manual

Scanning to USB Memory

You can save a scanned document to USB memory connected to the machine.
USB memory
Note
• Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.
• USB memory with a security function, memory card readers connected via USB,
USB memory via an extension cable and USB hub, and USB memory that does not
meet the USB standards, are all unsupported.
• If the USB memory becomes full while the data is being saved, the data that is
being written is all deleted. Therefore, make sure that the USB memory has enough
free space in advance.
• If you want to connect the USB memory via an extension cable, use a cable that is
shorter than 3 meters.
1
Load the document, and press <Scan>.
• For details on loading documents, refer to Chapter 1, "Loading Documents" in the User's
Guide.
• Set the document type, contrast, and resolution as necessary.
2
Press the [PC/USB] tab, and then [USB].
(See page 1-19.)
Basic Scanning
1
1-9