Electrical Connections - Smith HSE-VAS-015 User Manual

Electrical Connections

The power cord and plug are connected
with this water heater. Find a separate
socket for power plug and make sure the
socket is in firm contact with the plug.
Ensure that reliable earthing has been
done.
• Connect the water heater using independent sockets, do not use any adapters. Use
multimeter to check whether the live line and neutral line are not reverse, to ensure
complete safety.
• Before installing the water heater, confirm that the power of water heater matches electric
meter capacity and supply wire.
• The water heater should be earthed reliably. It is prohibited to connect the earth wire to
neutral wire or faucet water pipe.
Figure 16
CAUTION
12