Connect one end of the Discharge Tube to the Safety Valve and connect the other end to the
drain.
Figure 13
Connecting to Water Supply
•
Make necessary plumbing with reference
to the Installation Diagram. (Fig. 14)
•
A. O. Smith recommends Nylon/ Stainless
Steel (SS) braided hoses (Flexible Hoses)
having a minimum pressure rating of 8
Bar and hoses should be compatible for
hot water applications.
•
Connect the cold water pipe to the inlet
[Blue Cap].
•
Connect the hot water pipe to the outlet
[Red Cap].
•
Attach the Discharge Tube to Safety Valve
as shown in Installation Diagram. (Fig. 14)
*Flexible Hoses to be procured by the customer, not part of the standard product.
**Safety Valve comes included with the water heater.
Red Cap
*Flexible Hose
Hot Water Tap
Figure 14 Installation Diagram
9
Blue Cap
**Safety Valve
Discharge Lever
Discharge Tube
*Flexible Hose
Cold Water Tap
To Drain