Smith HSE-VAS-015 User Manual page 13

Table of Contents

Advertisement

Make sure a suitable teflon tape is used for all connections to prevent leakage.
Discharge tube should be installed downwards without any loops, folds or knots.
Ensure that the free end of the Discharge tube is placed over a suitable drain and
away from the users.
Discharge tube is provided to release the discharge from the water heater(through
the safety valve) in case excessive pressure is developed. The contents of the
discharge from the Safety valve may be hot and may cause burns to the users and
damage nearby objects if not properly routed to a drain.
It is recommended to operate the discharge lever in the safety valve on a regular
basis to ensure that there are no blockages and also to remove any lime deposits
that would have been formed inside the water heater.
Ensure that the water heater is in power OFF condition when the Discharge lever is
being operated. Ensure that the water is filled completely in the water heater before
switching it ON.
Use only Nylon/ Stainless Steel (SS) braided hoses (Flexible Hoses) having a minimum
pressure rating of 8 Bar and hoses should be compatible for hot water applications.
Failure to follow this instruction can result in property damage.
CAUTION
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hse-vas-025

Table of Contents