Connections - Sony DXC-990P Instructions For Use Manual

Connections

To supply power to the camera, use the
*
CMA-D2CE /D2MDCE/D3CE
adaptor (not supplied).
Note
Be sure to turn off the power supply for all
equipment before making any connection.
* CMA-D2CE/D3CE are intended for general purpose
use. They are not intended for medical use.
Using the CMA-D2CE
camera adaptor
There are two methods for connecting the
camera and the camera adaptor.
Using the CCDC cable
This connection only supplies power to the
camera.
For connecting method, see "Connecting
using the CCDC cable (for supplying power
only)" on page 33.
Using the CCXC cable
This connection supplies power to the
camera and transmits video signals to the
camera adaptor.
For connecting method, see "Connecting
using the CCXC cable (for supplying power
to camera and video signals to the camera
adapter)" on page 33.
32
Connections
*
camera
*
/D2MDCE
Note
Be sure to use one camera adaptor for each
DXC-990P unit.
Although the CMA-D2CE
camera adaptor has two CAMERA
connectors (4-pin and 12-pin), the power
consumption of the camera is such that two
camera units cannot be connected at the
same time.
* CMA-D2CE is intended for general purpose use. It is
not intended for medical use.
Using the CMA-D3CE* camera
adaptor
The connections using the CMA-D3CE
camera adaptor supply power to the camera
and transmit video signals to the camera
adaptor.
For connecting method, see "Connecting to
the CMA-D3CE* Camera Adaptor" on page
36.
* CMA-D3CE is intended for general purpose use. It is
not intended for medical use.
*
/D2MDCE
*