Removing the camera
1
Remove the 3 screws used to attach
the camera in step 6 of "Installation."
2
While pushing the entire camera up
towards the ceiling, move the camera
to the front.
The hooks will disengage, and you can
remove the camera.
Installing the Camera Using
the M3 Fixing Screw Holes
Attach the camera using 3 M3 fixing screw
holes located on the bottom of the camera.
Attach the camera to a fitting with a flat
surface using M3 screws with the following
specifications.
4
= 3 – 5 mm
4
= 1/8 – 7/32 inches
46
Connections
Connections
Use the AC power adaptor and AC power
cord to connect the camera to an AC outlet.
M3 screw
Connecting to an AC Outlet
EVI-H100S/H100V
DC 12 V