With Rgb Or S-Video Inputs - Sony DXC-990P Instructions For Use Manual

Connecting to Video Equipment With RGB or S-Video Inputs
Camera cable: CCXC-9DBS (D-sub
y
9-pin
CCMC-9DS (D-sub 9-pin
S-video connectors)
DXC-990P
MENU BLACK
TRIG IN
FILE
BARS
SELECT WHITE
ENTER
RGB/SYNC
LENS MENU LOCK
ON
OFF
VIDEO OUT
DC IN/ GEN LOCK
VBS
REMOTE
DC IN/VBS T
CCDC-5/10/25/50A/100A cable or CCXC-
12P02N/05N/10N/25N cable
a) If a CCXC cable is used, the S-video signal is also output from the S-video
output of the CMA-D2CE
b) When using a video monitor without a sync signal input connector, the camera
can be set to output a sync signal with the G signal or RGB signals.
For details, see "SYSTEM Menu" on page 24.
c) This setup is for connecting to a composite video (VBS) connector. To output
separated Y/C signals to the S-video input of video equipment, use a CCMC-
9DS camera cable.
For details on switching camera output between VBS (composite video) and Y/
C, see "SYSTEM Menu" on page 24.
* CMA-D2CE is intended for general purpose use. It is not intended for medical use.
34
Connections
BNC connectors), or
y
BNC,
RGB/SYNC
⎫
⎪
or
⎬
⎪
⎭
Camera cable CCXC-9DD
y
(D-sub 9-pin D-sub 9-pin)
Set the MODE
1
selector to the [1]
position.
2
CMA-D2CE*/
D2MDCE
camera adaptor
a)
*
/D2MDCE.
R input
G input
B input
b)
Sync input
Composite video (BNC)
c)
or S-video input (4-pin)
RGB/SYNC input
Computer, image
processor etc.
Equipotential ground
terminal (only for
CMA-D2MDCE)
CAMERA
(4-pin or 12-pin)
RGB monitor,
image processor,
etc.
Power
cord