Statistics Tab - Rmon History Log; Figure 5-47: Statistics - Rmon History Log - Linksys SRW2016 User Manual

16- or 24-Port 10/100/1000 Gigabit Switch with WebView
Source Interface. Select the source interface, either a port or LAG. Then select the appropriate number from the
drop-down menu.
Owner. Enter the name of the user.
Max No. of Samples to Keep. Specify the maximum number of samples to keep for this entry.
Sampling Interval. Enter the number of seconds during which samples should be taken from the ports.
Click the Submit button to save your changes.

Statistics Tab - RMON History Log

The RMON History Log screen shows interface-specific statistics involving network sampling. Each entry has
statistics from a single sample.
History Entry No. Select the history entry whose statistics you want to view.
Owner. This is the user who requested this sampling.
Sample No. This is the sample number from which the statistics were taken.
Drop Events. This is the number of dropped events that have occurred on the interface since the Switch was last
refreshed.
Received Bytes. This is the number of octets received on the interface since the Switch was last refreshed. This
excludes framing bits.
Received Packets. This is the number of packets received on the interface since the Switch was last refreshed.
Broadcast Packets. This is the number of good broadcast packets receive on the interface since the Switch was

Figure 5-47: Statistics - RMON History Log

last refreshed.
Multicast Packets. This is the number of good multicast packets received on the interface since the Switch was
last refreshed.
CRC Align Errors. This is the number of CRC and Align errors that occurred on the interface since the Switch was
last refreshed.
Undersize Packets. This is the number of undersized packets (fewer than 64 octets) received on the interface
since the Switch was last refreshed.
Chapter 5: Using the Web-based Utility for Configuration 43
Statistics Tab - RMON History Log