Chapter 6: Setting Up The Wireless-G Router For Broadband Wan Service Only; Overview; Before You Begin; Using The Setup Wizard - Linksys WRT54G3G User Manual

Wireless-G Router for 3G/UMTS Broadband
Chapter 6: Setting up the Wireless-G Router for
Broadband WAN Service Only

Overview

This chapter covers the steps for configuring the Router for broadband WAN service only, such as cable or DSL
service. If you want to configure the Router for HSDPA/3G/UMTS or GPRS service only, go to "Chapter 5: Setting
up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service." If you want to configure the Router for
broadband WAN and HSDPA/3G/UMTS or GPRS service, go to "Chapter 7: Setting up the Wireless-G Router for
Broadband WAN and HSDPA/3G/UMTS or GPRS Service."

Before You Begin

Before you begin, make sure that you have the following:
• broadband modem
• settings for your Internet connection type.
The information about your Internet connection type should have been provided when your broadband modem
was installed. If you do not have this information, contact your Internet Service Provider (ISP) for your settings.
IMPORTANT: If you want to configure the Router for HSDPA/3G/UMTS or GPRS service in
addition to broadband WAN service, proceed to "Chapter 7: Setting up the Wireless-G Router for
Broadband WAN and HSDPA/3G/UMTS or GPRS Service."

Using the Setup Wizard

1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears,
enter D:\SetupWizard.exe (if "D" is the letter of your CD-ROM drive).
2. The Setup Wizard will automatically detect the language setting of your PC. On the initial Welcome screen,
click the Next button if you want to proceed with the Setup Wizard using the current language. If you want to
use a different language, select the appropriate language, and then click the Next button.

Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only

Overview
Figure 6-1: Setup Wizard's Welcome - Language
Selection Screen
28