The Setup Tab - Mac Address Clone; Figure 8-20: Setup Tab - Mac Address Clone - Linksys WRT54G3G User Manual
2.4ghz wireless-g router for 3g/umts broadband
Hide thumbs
Also See for WRT54G3G:
- User manual (145 pages) ,
- Product data (2 pages) ,
- Firmware upgrade manual (30 pages)
Table of Contents
Advertisement
Wireless-G Router for 3G/UMTS Broadband
The Setup Tab - MAC Address Clone
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will
require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC
address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router
with the MAC Address Clone feature.
MAC Clone
Enable/Disable. To have the MAC Address cloned, click the radio button beside Enable.
Figure 8-20: Setup Tab - MAC Address Clone
User Defined Entry. Enter the MAC Address registered with your ISP here.
Clone Your PC's MAC. Clicking this button will clone the MAC address.
Change these settings as described here, and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
67
The Setup Tab - MAC Address Clone
Advertisement
Table of Contents
