Table of Contents
Advertisement
Wireless-G High-Speed Router with SpeedBooster
Chapter 5: Setting up the Wireless-G High-Speed Router
with SpeedBooster
Overview
The Wireless-G High-Speed Router with SpeedBooster Setup Wizard will guide you through the installation
procedure. It will go through the instructions for configuring the Router's network and wireless settings.
Using the Setup Wizard
1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and
the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
2. The Setup Wizard will automatically detect the language setting of your PC. On the initial Welcome screen,
click the Next button if you want to proceed with the Setup Wizard using the current language. If you want to
use a different language, select the appropriate language, and then click the Next button.
3. On the following Welcome screen, click the Click Here to Start button if this is the first time you are running
the Setup Wizard. These are your other choices:
Wireless Setup - If you have a computer displaying the SecureEasySetup logo, then click Wireless Setup
and proceed to the section at the end of this chapter, "Using SecureEasySetup to Configure Your Notebook."
NOTE: SecureEasySetup uses WPA-Personal encryption. If your current wireless devices do not
support WPA-Personal security, you can't use SecureEasySetup on your network. You will need to
manually configure your network security using the encryption supported by your existing devices.
Norton Internet Security - Click the Norton Internet Security button to install the Norton Internet Security
software program.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
Chapter 5: Setting up the Wireless-G High-Speed Router with SpeedBooster
Overview
Figure 5-1: Setup Wizard's Welcome - Language
Selection Screen
Figure 5-2: Setup Wizard's Welcome - Start
Wizard Screen
12
Advertisement
Table of Contents
