Wireless-G Router for Mobile Broadband
Chapter 6: Setting up the Wireless-G Router for
Broadband WAN Service Only
Overview
This chapter covers the steps for configuring the Router for broadband WAN service only, such as cable or DSL
service. If you want to configure the Router for mobile broadband service only, go to "Chapter 5: Setting up the
Wireless-G Router for Mobile Broadband Service." If you want to configure the Router for broadband WAN and
mobile broadband service, go to "Chapter 7: Setting up the Wireless-G Router for Broadband WAN and Mobile
Broadband Service."
Before You Begin
Before you begin, make sure that you have the following:
• broadband modem
• settings for your Internet connection.
The information about your Internet connection should have been provided when your broadband modem was
installed. If you do not have this information, contact your Internet Service Provider (ISP) for your settings.
IMPORTANT: If you want to configure the Router for mobile broadband service in addition to
broadband WAN service, proceed to "Chapter 7: Setting up the Wireless-G Router for Broadband
WAN and Mobile Broadband Service."
Using the Setup Wizard
1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\SetupWizard.exe (if "D" is the letter of your CD-ROM drive).
2. On the Welcome screen, click the Click Here to Start button if this is the first time you are running the Setup
Wizard. These are your other choices:
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only
Overview
Figure 6-1: Setup Wizard's Welcome - Start
Wizard Screen
27