Wireless-G Router for 3G/UMTS Broadband
9. Connect the included Ethernet network cable to the Ethernet network port of your computer. (This cable is
color-coded yellow to match the yellow Ethernet ports on the Router.)
Click the Next button.
10. Connect the other end of the cable to one of the Ethernet ports labeled 1-4 on the side panel of the Router.
Connect additional computers or other devices to the Router.
Click the Next button.
Chapter 7: Setting up the Wireless-G Router for Broadband WAN and HSDPA/3G/UMTS or
GPRS Service
Figure 7-7: Connect the Router to a Computer Screen
Figure 7-8: Connect the Router to a Computer Screen,
continued
44