Linksys WRT54G3G User Manual page 98

Wireless-G Router for 3G/UMTS Broadband
Mobile
The Router allows SMS (Short Message Service) commands through your mobile phone. This feature allows you
to select authorized users who can then command the Router to reboot, connect to a mobile network, or send a
WOL packet to a device or all devices on the network.
SMS Deletion
The SMS will be stored in the SIM. The SIM card will not receive incoming messages when the SIM card capacity
has been exceeded. The user can delete SMS messages manually or automatically. The default is Manually. If
you want the Router to delete the oldest messages first so that the number of saved SIM messages will be
limited, select Automatically.
Limit Number of SMS. If you selected Automatically, then you can change the number of saved SIM
messages. The default is 8.
Accept SMS
SMS-INT timer. Enter in the field the length of time in seconds that you want between commands.
Select Trusted Number RC4 Encryption to allow RC4 encryption for the command and to only authorize
users with the selected phone numbers below to use this feature.
Select Trusted Number to only authorize users with the selected phone numbers below to use this feature.
Select Anonymous to authorize everyone to use this feature.
Select None to authorize no one to use this feature.
Phone1-5. Enter the phone numbers of those you are authorizing.
Reboot by SMS. Select Enable to allow a reboot.
WOL by SMS (Wake-on-LAN). Select this feature to wake up the equipment on your network.
PC1-5 MAC. This feature is available when WOL by SMA is enabled. Enter the MAC addresses of the devices and/
or PCs on your network.
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Management
88