Table of Contents
Advertisement
Menu Operations
The menus displayed on the viewfinder screen enable various
settings of the camera.
The following controls are used to operate the menus. You can
also use the MENU SEL knob/ENTER button or DISPLAY
switch on the rear of the camera.
Press
MENU SEL knob/ENTER button
Starting Menu Operations
To display a menu page
Set the DISPLAY switch from OFF to MENU.
The menu page that last operated will be displayed.
(If it is the first time, the CONTENTS page of the OPERATION
menu will be displayed.)
To display the TOP MENU screen
If you set the DISPLAY switch from OFF to MENU while
holding the MENU SEL knob/ENTER button pressed, "TOP" is
displayed at the upper right corner of the screen. Selecting it
displays the TOP MENU screen, which lists the available
menus, and you can select the menus on this screen.
TOP MENU screen
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
To disable the "TOP" indication
Turn the power once off then on again, or set the DISPLAY
switch from OFF to MENU while holding the CANCEL/
STATUS switch pressed to CANCEL. This disables the TOP
selection.
Available menus
USER menu
This menu can include menu pages selected from among the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus, for convenience. Changing, adding, and
Turn
DISPLAY switch
CANCEL/STATUS switch
deleting pages can be performed with the USER MENU
CUSTOMIZE menu.
USER MENU CUSTOMIZE menu
This menu allows you to edit the USER menu.
For details, see "Editing the USER Menu" (page 22).
ALL menu
This menu permits you to control all items of the OPERATION
menu, PAINT menu, MAINTENANCE menu, FILE menu, and
DIAGNOSIS menu as a single menu.
OPERATION menu
This menu contains items for camera operators to operate the
camera. It mainly permits viewfinder, intercom, and switch
settings.
PAINT menu
This menu contains items for making detailed image
adjustments while using a waveform monitor to monitor the
waveforms output from the camera. Support of a video
engineer is usually required to use this menu.
The menu items are mostly controlled through an external
remote control panel or master setup unit.
MAINTENANCE menu
This menu contains items for performing camera maintenance
operations, such as changing the system or setting
infrequently used "paint" items.
FILE menu
This menu is for performing file operations, such as writing or
clearing the reference file.
DIAGNOSIS menu
This menu enables you to confirm the self-diagnostic
information.
To select a menu on the TOP MENU screen
1
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) with the desired menu indication.
2
Press the MENU SEL knob/ENTER button.
The CONTENTS page or the last operated page of the
selected menu is displayed.
20
Advertisement
Table of Contents
