Fan-Pcb-Assy, Cu-Board-Assy And S2V-Pu-Board - Sharp AR-C360P Service Manual

4.3.7 FAN-PCB-Assy, CU-Board-Assy and S2V-PU-Board

(1) Open the Cover Assy-Top.
(2) Remove the covers concerned. (Refer to Section 4.3.2)
Remove the connector, then Remove FAN-PCB-Assy 1.
(3)
Unscrew the 2 screws, remove the Plate-Shield-Assy 3, then remove the connector.
(4)
Unscrew 7 screws 4, then remove CU-Board-Assy 5.
(5)
Disconnect all 17 Connectors, then unscrew 4 screws 6, and remove S2V-PU-Board 7.
(6)
Unscrew 9 screws 8, remove the Plate-Shield-Box-Assy 9, then remove all the connec-
(7)
tors.
Rev. 1
9
8
× 9
1
5
4
× 7
7
6
× 4
3
2
74 /