Adjustment; System Maintenance Menu - Sharp AR-C360P Service Manual

5.

ADJUSTMENT

Adjust the AR-C360P by key input from the operation panel.
The AR-C360P comes with a Maintenance Menu in the usual menu. Select the menu according to the
items to adjust and the purpose of adjustment.
5.0

System Maintenance Menu

This menu is launched by turning on the power source while keeping the [Menu+]+[Menu-]+[Help]
switches pressed.
The menu display is only available in English regardless of destination.
This menu can be modified according to the destination, etc. Therefore, it is not open
Note
(closed) to the end user.
Category Item
System USER
Maintenance
Maintenance
Menu
Maintenance
Print Menu
Print Page
Count
Personality
Diagnostic
Mode
Rev. 1
Table 5-0. Maintenance Menu Display Table (1/2)
Value DF Old Menu
ODA * "SYSTEM
OEL MAINTENANCE
APS MENU" -
"OKIUSER" -
JP1
"OKIUSER"
JPOEM1
OEMA
OEMI
NEXT
Enable *
Disable
Enable * "SYSTEM
Disable MAINTENANCE
MENU" - "PAGE
CNT PRINT" -
"PAGE CNT PRINT"
NEXT
"SYSTEM
MAINTENANCE
MENU"-
"DIAGNOSTIC
MODE XX.XX"
Function
Set the destination.
JPOEM1: Japan OEM
OEMA: A4 Default Overseas OEM
OEML : Letter Default Overseas OEM
Automatically reboot after escaping
from the menu.
The default value for non-PS
models is JP1.
This displays the menu to initialize
the harddisk and Flash ROM.
This switches whether to Show/Hide
the Print Information — ID Check
Pattern and Engine Status of the
Function Menu. If this item is
disabled, the Print Information —
ID Check Pattern and Engine
Status of the Function Menu is
never displayed.
The printer is restarted after the
settings are modified and escaping
from the menu.
This sets whether to Show/Hide the
display of the "Functions"-
"Configuration" - "Print Page
Count"-"Total Page".
This displays the menu to edit the
default PDL language supported
according to destination.
This goes to the engine s self-
diagnosis mode.
Valid Save
RB -
ET -
ET -
ET -
90 /