Sharp AR-C360P Service Manual page 156

(A)
• NO [NG CALIBRATION LEFT/RIGHT] display
• YES
• NO
• NO
• NO
• NO
• NO [DYNAMICRANGE LEFT/RIGHT] display
• YES
• NO
• NO
• NO
(B)
Rev. 1
Is the color drift sensor cover dirty?
YES Cleaning defect of the surface of the sensor cover by the cleaning
blade on the rear of the shutter. Replace the shutter and sensor
cover then restore the cleaning performance.
Check the Z71 PCB (Color Drift Sensor PCB) connector, KYN PCB (engine
PCB) RSNS, and power connector connection. Has operation been restored
after checking connection?
YES END
Replace the Z71 PCB. Has operation been restored?
YES END
Replace the engine PCB. Has operation been restored?
YES END
Replace the Z71 PCB, and Engine PCB connection cable. Has operation
been restored?
YES END
Is the color drift sensor cover dirty?
YES Cleaning defect of the surface of the sensor cover by the cleaning
blade on the rear of the shutter. Replace the shutter and sensor
cover then restore the cleaning performance.
Is the shutter open/close operation abnormal?
• YES Replace the shutter. Has operation been restored?
YES END
• NO Replace the shutter open/close solenoid. Has operation been re-
stored?
YES END
Replace the belt unit. Has operation been restored?
YES END
Replace the ID unit. Has operation been restored?
YES END
156 /