Sharp AR-C360P Service Manual page 28

(1) Paper Supplied from the 1st Tray
1. Paper proceeds when the paper supply motor turns (CCW) and the paper supply
clutch is connected, until the IN1 sensor turns ON.
2. When the IN1 sensor is turned ON, a certain volume of paper is further transported
until it is against the 1st resist roller. (this corrects paper skew)
3. The paper is transported to the transport belt when the electromagnetic clutch which
delivers power that the register strike motor is turning (CW) and the thrust reliance
of a paper is completed to the 1st register strike roller is connected.
Pickup roller
Feed motor
Rev. 1
2nd regist roller
Write sensor
The clutch of
electromagnetism
The clutch of
electromagnetism
Feed roller
Feed sensor
Paper
Retard roller
Figure 2-6
IN2 sensor
Middle transport roller
1st regist roller
IN1 sensor
Regist motor
28 /