Draytek Vigor2760 series User Manual page 172

To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 10 port ranges for diverse services.
Available settings are explained as follows:
Item
Enable Open Ports
Comment
Private IP
Protocol
Start Port
End Port
Vigor2760 Series User's Guide
Description
Check to enable this entry.
Make a name for the defined network application/service.
Enter the private IP address of the local host or click
Choose PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of
the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP,
or ----- (none) for selection.
Specify the starting port number of the service offered by
the local host.
Specify the ending port number of the service offered by
the local host.
160