Programming An Entry Gate; Programming Other Devices; Reprogramming A Button - Lexus GS350 Owner's Manual

596
5-7. Other interior features
Press and hold the vehicle' s programmed HomeLink
3
seconds and release it. Repeat this step once again. The garage door
may open.
If the garage door opens, the programming process is complete. If the door
does not open, press and release the button a third time. This third press and
release will complete the programming process by opening the garage door.
The ceiling mounted garage door opener motor should now recognize the
HomeLink
Repeat the steps above to program another rolling code system for
4
any of the remaining HomeLink
Programming an entry gate (for U.S.A. owners)/Programming a
■
devices in the Canadian market
Place the remote control transmitter 1 to 3 in. (25 to 75 mm) away
1
from the HomeLink
Keep the HomeLink
Press and hold the selected HomeLink
2
Repeatedly press and release (cycle) the remote control transmitter
3
for 2 seconds each until step
When the HomeLink
4
the buttons.
Test the HomeLink
5
button. Check to see if the gate/device operates correctly.
Repeat the steps above to program another device for any of the
6
remaining HomeLink

Programming other devices

■
To program other devices such as home security systems, home door
locks and lighting, contact your Lexus dealer for assistance.

Reprogramming a button

■
The individual HomeLink
grammed. To reprogram a button, follow the "Reprogramming a
HomeLink
GS350_OM_OM30D41U_(U)
®
signal and operate the garage door.
®
buttons.
®
indicator light in view while programming.
®
indicator light starts to flash rapidly, release
®
operation by pressing the newly programmed
®
buttons.
®
buttons cannot be erased but can be repro-
®
button" instructions.
®
buttons.
®
button.
is completed.
4
®
button for 2