Registering Air Conditioning Settings To Electronic Keys; Using Automatic Mode; Humidity Sensor - Lexus GS350 Owner's Manual

Registering air conditioning settings to electronic keys

■
Unlocking the vehicle using an electronic key and turning the engine switch to
●
IGNITION ON mode will recall that key' s registered air conditioning settings.
When the engine switch is turned off, the current air conditioning settings will auto-
●
matically be registered to the electronic key that was used to unlock the vehicle.
The system may not operate correctly if more than one electronic key is in the vicinity
or if the smart access system with push-button start is used to unlock a passenger
door.
Settings for the electronic key and the corresponding door can be changed. Contact
your Lexus dealer.

Using automatic mode

■
Fan speed is adjusted automatically according to the temperature setting and the
ambient conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow immedi-
ately after

Humidity sensor

■
A sensor, which detects humidity inside the
vehicle and the temperature of the wind-
shield, is provided to detect fog on the front
windscreen. Due to the sensor, when auto-
matic mode is set the air conditioning may
make the following controls:
Changing the amount of air flow
●
Changing the amount of air introduced from
●
outside when in outside air mode with the air
vents in the
Changing the settings of the air vents to
●
when the
GS350_OM_OM30D41U_(U)
5-2. Using the air conditioning system and defogger
is pressed.
position
is set
365
5