Resetting The Message Indicating Maintenance - Lexus GS350 Owner's Manual

616
6-2. Maintenance
Repair and replacement
■
It is recommended that genuine Lexus parts be used for repairs to ensure perfor-
mance of each system. If non-Lexus parts are used in replacement or if a repair shop
other than a Lexus dealer performs repairs, confirm the warranty coverage.
Resetting the message indicating maintenance is required (U.S.A. only)
■
After the required maintenance is performed according to the maintenance sched-
ule, please reset the maintenance data.
To reset the data, follow the procedure described below:
Switch the display to the trip meter "A" (P. 82) when the engine is running.
1
Turn the engine switch off.
2
While pressing the "ODO TRIP" button (P. 82), turn the engine switch to the
3
IGNITION ON mode (do not start the engine because otherwise the reset mode
will be canceled).
The message shown in the illustration will
appear on the display.
Continue to press and hold the button until
the trip meter displays "000000".
Allow inspection and repairs to be performed by a Lexus dealer
■
Lexus technicians are well-trained specialists and are kept up to date with the latest
●
service information. They are well informed about the operations of all systems on
your vehicle.
Keep a copy of the repair order. It proves that the maintenance that has been per-
●
formed is under warranty coverage. If any problem should arise while your vehicle
is under warranty, your Lexus dealer will promptly take care of it.
GS350_OM_OM30D41U_(U)