90
2. Instrument cluster
System check display
■
After turning the engine switch to IGNITION ON mode, "SYSTEM CHECK" is dis-
played while system operation is checked.
Eco Driving Indicator Zone Display
■
Suggests Zone of Eco driving and Eco driving
ratio based on acceleration.
Eco driving ratio based on acceleration
1
If the acceleration exceeds Zone of Eco
driving, the right side of Eco Driving Indica-
tor Zone Display blinks.
Zone of Eco driving
2
Eco Driving Indicator will not operate in the following conditions:
The shift lever is anything other than D.
●
Paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (P. 181)
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
●
Outside temperature display
■
In the following situations, the correct outside temperature may not be displayed, or
the display may take longer than normal to change.
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit of a
●
garage, tunnel, etc.)
Setting display automatic cancelation
■
In the following situations, setting display in which the settings can be changed
through the "DISP" button will automatically be turned off.
When a warning message appears while the setting display is displayed
●
When the vehicle begins to move while the setting display is displayed
●
GS350_OM_OM30D41U_(U)