Wireless Cylinder Thermostat (Cs92A) - Honeywell evohome Installation Manual

evohome Installation Guide

Wireless Cylinder Thermostat (CS92A)

Press the button on the Cylinder Thermostat transceiver
1
The green light should come on. If it doesn't,
2
reinsert the batteries and try again
The evohome Controller will display the signal strength
(poor to excellent) and the transceiver should flash
the red LED from 1 flash (poor) to 5 flashes (excellent)
– no flashing means the transceiver has not received
a test signal from the evohome Controller.
To exit test mode press the button on the transceiver.
1
PRESS FOR
5 SECONDS
35