Running Communications; Communicating With A Host - Symbol PDT 6100 Series Product Reference Manual

PDT 6100 Product Reference Guide

Running Communications

Communicating with a Host

The 6100 communicates with a host or printer through the CRD 6100 or the Charging and
Communications Cable (CCC).
To communicate with a host or printer through the CRD 6100:
1. Set up the cradle as described in
6100 Quick Reference Guide.
2. Place the 6100's base in the cradle. Press the top of the 6100 against the cradle back
until it is firmly seated.
The terminal's Charging LED flashes yellow and then lights solid yellow when the
terminal is securely placed in the cradle.
3. Start the communications program on the host and the 6100.
5-14
Connecting the Cables on page
Figure 5-6. PDT 6100 Seated in CRD 6100
2-3, or in the CRD
33222011.eps