Set Up And Connect To The Internet - NETGEAR AirCard 810S User Manual

Note: You cannot charge the hotspot while it is boosting another device.

To start the jump boost of another device from the touch screen:
1. Plug the jump boost cable into your hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
On the Home screen, a pop-up window appears with boost options. If the pop-up window
does not display, tap Settings > Jump Boost.
3. Tap one of the boosting options (30, 60, or 90 minutes).

To start the jump boost of another device from the hotspot web page:
1. Plug the jump boost cable into your hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
3. On the home page, log in as an administrator.
4. Click the Jump Boost button.
5. Select one of the boosting options (30, 60, or 90 minutes).

Set Up and Connect to the Internet

To install the battery and micro SIM card in your hotspot, complete the steps in the sections
listed in steps 1 and 2.

To set up and connect to the Internet:
1. Install the Micro SIM card.
For more information, see
2. Install the battery.
For more information, see
3. Connect to the Internet.
For more information, see
4. Personalise the hotspot.
For more information, see
Telstra Wi-Fi 4GX Advanced III
Install the Micro SIM Card
Install the Battery on page 9.
Connect to the Internet
Personalise the Hotspot
Get Started
7
on page 8.
on page 10.
on page 10.