Table of Contents
Advertisement
Attaching a lens
1
Remove the body cap from the camera and the
rear lens cap from the rear of the lens.
•
When changing the lens, quickly change the lens away
from dusty locations so as to keep dust or debris from
getting inside the camera.
•
When shooting, remove the front lens cap from the front
of the lens
2
Mount the lens by aligning the orange index
marks (mounting indexes) on the lens and
camera.
3
Turn the lens clockwise until it clicks into the
locked position.
Be sure to put the lens on straight.
Notes
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
• E-mount lenses are not compatible with this camera.
• When a DT lens is attached or [APS-C Size Capture] is set to [On] in the
image is displayed in full screen view on the LCD screen with the angle of view of the APS-C size. The
live view image in the viewfinder is also displayed entirely and you can check the composition or effect
ENG
50
Front lens cap
Body cap
Rear lens cap
Orange index marks
Setup menu, a live view
Advertisement
Table of Contents
