Fujitsu AUU7RLF Design & Technical Manual page 144

REMOTE CONTROLLER CUSTOM CODE SETTING
„ „
In function setting, please change to the setting that custom code setting of Wireless remote
controller is the same as indoor unit according to the following content when you change custom
code setting of indoor unit.
1. Press the START/STOP "
only the clock is displayed on the remote
controller display.
3. Press the SET TEMP. "
button to change the custom code between
A→b→c →d.
● If no buttons are pressed within 30 seconds after the custom code is displayed, the system
returns to the original clock display. In this case, start again from step 1.
● The air conditioner custom code is set to A prior to shipment.
● If you do not know the air conditioner custom code setting, try each of the custom codes
("A→b→c →d") until you find the code which operates the air conditioner.
REMOTE CONTROLLER TEMPERATURE UNIT
„ „
To change the temperature unit:
• Press the "°C / °F" switching button to select the preferred temperature unit. (Factory setting is °F.)
" button until 2. Press the "MODE" button for at least 5
seconds to display the current custom code
(initially set to A).
" or the " " 4. Press the "MODE" button again to return to
the clock display. The custom code will be
changed.
- (01 - 140) -