Fujitsu AUU7RLF Design & Technical Manual page 139

REMOTE CONTROLLER CUSTOM CODE SETTING
„ „
In function setting, please change to the setting that custom code setting of Wireless remote
controller is the same as indoor unit according to the following content when you change custom
code setting of indoor unit.
1. Press the START/STOP "
only the clock is displayed on the remote
controller display.
3. Press the SET TEMP. "
button to change the custom code between
A→B→C →D.
● If no buttons are pressed within 30 seconds after the custom code is displayed, the system
returns to the original clock display. In this case, start again from step 1.
● The air conditioner custom code is set to A prior to shipment.
● If you do not know the air conditioner custom code setting, try each of the custom codes
(A→B→C→D) until you find the code which operates the air conditioner.
REMOTE CONTROLLER TEMPERATURE UNIT
„ „
To change the temperature unit:
(1) Press the TEMP. (Up) button ( ) for at least 5 seconds to display the current temperature unit. (Factory setting: °F)
(2) Press the TEMP. buttons (
(3) With either of pressing the START/STOP button or no additional button operation for 30 seconds in step 2., the
temperature unit currently selected will be set.
" button until 2. Press the MODE button for at least 5
" or the " " 4. Press the MODE button again to return to
/ ) to switch the temperature unit. (°F ↔ °C)
- (01 - 135) -
seconds to display the current custom code
(initially set to A).
the clock display. The custom code will be
changed.