Rfc2543_Hold_Enable_N; Dtmf_Signal_Len; Dtmf_Intdigit_Tim - Panasonic KX-UT123 Administrator's Manual

Web User Interface Reference

RFC2543_HOLD_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

DTMF_SIGNAL_LEN

Value Format
Description
Value Range
Default Value

DTMF_INTDIGIT_TIM

Value Format
Description
Value Range
Default Value
Document Version 2013-03
Telephone-event Payload Type (Page 116)
RFC2543_HOLD_ENABLE_1, RFC2543_HOLD_ENABLE_2, ...,
RFC2543_HOLD_ENABLE_6
Boolean
Specifies whether to enable the RFC 2543 Call Hold feature on this line.
•
Y (Enable RFC 2543 Call Hold)
•
N (Disable RFC 2543 Call Hold)
Note
•
If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
•
If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Y
Supports RFC 2543 (c=0.0.0.0) (Page 120)
Integer
Specifies the length of the DTMF signal, in milliseconds.
60–200
180
Integer
Specifies the interval, in milliseconds, between DTMF signals.
60–200
90
5.6.3 Miscellaneous VoIP Settings
Administrator Guide 241