Vertex Standard EVX-531 Operating Manual page 43

 Press the [ D ] key again, then edit the message us-
ing the [ 0 ] - [ 9 ] ] key (for select the character) and
[ A ] / [ B ] key (for select the digit).
 Press the [ D ] key, then press the [ A ] / [ B ] keys (or
SIDE-1/SIDE-2 buttons) to select the "SAVE"
menu.
 Press the [ D ] key again to save the edited mes-
sage.
Delete the message
Important Note: You can not delete the message
which determined by the CE142 Programming Soft-
ware.
 Press the [ A ] / [ B ] keys (or SIDE-1/SIDE-2 but-
tons) to select the message you wish to delete.
 Press the [ D ] key, then press the [ A ] / [ B ] keys
(or SIDE-1/SIDE-2 buttons) to select the "DE-
LETE" menu.
 Press the [ D ] key. The display indicates "DEL Y/
N"("Y" is blinking).
 Press the [ D ] key again to delete the selected
message. You may cancel the deleting the mes-
sage by pressing the [ C ] key.
EVX-530 S O
EriES pErating
a o
dVanced peratIon
M
anual
o s 1
ptIon WItch
Activates the optional accessory while pressing the
assigned PF key.
o s 2
ptIon WItch
Press, (or press and hold), the assigned PF key to
toggle the optional accessory "On" and "Off".
tx s d
aVe IsaBle
The Transmit Battery Saver helps extend battery life
by reducing transmit power when a very strong signal
from an apparently nearby station is being received.
Under some circumstances, though, your hand-held
radio may not be heard well at the other end of the
communication path, and high power may be neces-
sary at all times.
Press, (or press and hold), the assigned PF key to
disable the Transmit Battery Saver, if you are operat-
ing in a location where high power is almost always
needed.
Press again, (or press and hold again), the assigned
PF key, the Transmit Battery Saver activates to re-
duce the transmit power when a very strong signal
from an apparently nearby station is being received.
41