Vertex Standard EVX-531 Operating Manual page 38

RECV". If your radio's display indicates "NO
ACK", the revive command did not succeed.
STUN: You may stun the designated radio forc-
ibly by remote control.
Press the [ D ] key to transmit the stun command
to the designated radio. If the designated radio
is alive, the designated radio transmits the ACK
command and stuns it. If not, your radio's display
indicates "NO ACK", the stun command did not
succeed.
The stunned radio will revive by the REVIVE
function described previously.
III ) New List: This category allows you to create the
desired Contact Alias and save it into the contact list.
r Press the [ D ] key, the display indicates "ENTER
ID" briefly, enter the "ID number" you wish to,
using the [ 0 ] - [ 9 ] key (for select the number) and
[ A ] / [ B ] key (for select the digit).
r Press the [ D ] key again, the display indicates
"ENTERTAG" briefly, enter the desired "Tag
Name" using the [ 0 ] - [ 9 ] key (for select the char-
acter) and [ A ] / [ B ] key (for select the digit).
You may delete the current character by press-
36
a o
dVanced peratIon
ing the [ Ý ] key, or insert the space character by
pressing the [ # ] key.
r Press the [ D ] key again, the display indicates
"ALT SEL" briefly, select the desired alert tone
using the SIDE-1/SIDE-2 buttons (or [ A ] / [ B ]
keys).
r Press the [ D ] key again to store the new setting
into the contact list as the Private Call. You may
cancel the new setting by pressing the [ C ] key.
IV ) Manual: This category allows you to perform
the "CALL ALT", "RADIO CK", "RADIOMON",
"REVIVE" and "STUN" function for the desired
Contact Alias manually by the following operation.
r Press the [ D ] key, the display indicates "ENTER
ID" briefly, enter the "ID number" you wish to
operate the function, using the [ 0 ] - [ 9 ] key (for
select the number) and [ A ] / [ B ] key (for select the
digit).
r Press the [ D ] key again, then press the SIDE-1/
SIDE-2 buttons (or [ A ] / [ B ] keys) to select the de-
sired function described above.
r Press the [ D ] key to perform the function. You
may cancel the function by pressing the [ C ] key.
EVX-530 S O
EriES pErating
M
anual