Vertex Standard EVX-531 Operating Manual page 42

or "SAVE" menu depending on your purpose,
and move to each step as follow.
Send the message
 Press the [ D ] key, then press the [ A ] / [ B ] keys (or
SIDE-1/SIDE-2 buttons) to select the "Call ID"
you wish to send a message.
You may enter a new "Call ID" manually by fol-
lowing operation:
 Press the SIDE-1/SIDE-2 buttons to select the
"MANUAL" menu which is located at the last
"Call ID" loop.
 Press the [ D ] key, then enter the "Call ID" using
the [ 0 ] - [ 9 ] key.
 Press the [ D ] key again to send the message. The
display indicates "TEXT MSG" and "Call ID"
alternately while sending the message.
Save the message
 Press the [ D ] key to save the created message.
SEL MSG: You may send/edit/delete the message in
this function.
Send the message
 Press the [ A ] / [ B ] keys (or SIDE-1/SIDE-2 but-
tons) to select the message you wish to send.
40
a o
dVanced peratIon
 Press the [ D ] key, then press the [ A ] / [ B ] keys (or
SIDE-1/SIDE-2 buttons) to select the "SEND"
menu.
 Press the [ D ] key again, then press the [ A ] / [ B ]
keys (or SIDE-1/SIDE-2 buttons) to select the
"Call ID" you wish to send a message.
You may enter a new "Call ID" manually by fol-
lowing operation:
l Press the [ A ] / [ B ] keys (or SIDE-1/SIDE-
l Press the [ D ] key, then enter the "Call ID" us-
 Press the [ D ] key again to send the message. The
display indicates "TEXT MSG" and "Call ID"
alternately while sending the message.
Edit the message
Important Note: You can not edit the message which
determined by the CE142 Programming Software.
 Press the [ A ] / [ B ] keys (or SIDE-1/SIDE-2 but-
tons) to select message you wish to edit.
 Press the [ D ] key, then press the [ A ] / [ B ] keys (or
SIDE-1/SIDE-2 buttons) to select the "EDIT"
menu.
2 buttons) to select the "MANUAL" menu
which is located at the last "Call ID" loop.
ing the [ 0 ] - [ 9 ] key.
EVX-530 S O
EriES pErating
M
anual