Kentucky Wildwood Logs - Vermont Castings VFI33LNV Installation And Operating Instructions Manual

LOG PLACEMENT LOG PLACEMENT
KENTUCKY WILDWOOD KW18-R,
KW24-R AND KW30-R LOGS PLACEMENT
(AVAILABLE FOR MONESSEN AND MAJESTIC
SYSTEMS)
1. Place bottom front right log #1 on right pin located on
burner and right grate bar.
Figure 40
2. Place bottom rear right log #2 on pin on rear of grate
assembly and push towards rear as far as possible.
Log #2
Figure 41
3. Place bottom rear left log #3 on pin on left rear of grate
assembly and push towards rear as far as possible.
Figure 42
20307670
Log #3
4. Place bottom front left log #4 on left pin located on
burner and left grate bar.
Log #1
Log #4
Figure 43
5. Place center left log #5 on top of log #4 on left side
with small end of log #5 under log #3 and on left grate
bar.
Log #5
Figure 44
6. Place center top log #6 on two (2) pins on top of log
#2. The front end of log #6 should rest on log #4.
Figure 45
VFI33 Vent Free Gas Fireplace System
Log #6
29