Place The Decorative Rock - Vermont Castings VFI33LNV Installation And Operating Instructions Manual

Vfi series vent free gas fireplace
Table of Contents

Advertisement

VFI33 Vent Free Gas Fireplace System
6. Place top left log (#6) on left rear log (#4) and left front
log (#5) using locating grooves on bottom of #6 and
locating blocks on logs #4 and #5. Figure 38
7. Place right top log (#7) on right rear log (#3) and right
front log (#2) using locators on the bottom of log #7 and
locators on logs #2 and #3. Figure 38
Left Top Log #6
Figure 38
8. Place small right front top log (#8) on log #7 and log
#2 using locating grooves on the bottom of log #8 and
locating blocks on log #7 and log #2. Figure 39
Figure 39
28
Right Top
Log #7
Right Front Top
Log #8

PLACE THE DECORATIVE ROCK

Optional volcanic rock may be placed around the unit on
the fl oor of the fi rebox. Be sure to avoid any areas on the
burner itself.
DO NOT sprinkle volcanic rock on the logs,
around the pilot, or on or near burners. This
may cause sooting. Place volcanic rock only
on the fl oor of the fi replace.
During initial operation of the new heater,
new burning logs and/or rock wool will give
off a paper burning smell and orange fl ames
will be present. Simply open the windows for
a few hours to vent the odor.
LOG PLACEMENT
LOG PLACEMENT
20307670

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents