Table of Contents
Advertisement
VFI33 Vent Free Gas Fireplace System
WARNING: The positioning of the
logs is critical to the safe and clean
operation of this heater. Sooting and
other problems may result if the logs are not
properly and fi rmly positioned in the appliance.
Never add additional logs or embellishments
such as pine cones, vermiculite or rock wool to
the heater. Only use the logs and 2G-RW rock
wool (for NB18) supplied with the unit.
Failure to position the parts in accordance
with diagrams below or to use only parts
specifi cally approved for this heater may result
in property damage or personal injury.
BEFORE YOU BEGIN
This unit comes with the option of three different log sets.
Two refractory options:
•
KW18-R
•
HO18-R (Majestic)
•
BO18-R (Monessen)
One ceramic fi ber option:
•
HO18-F (Majestic)
•
BO18-F (Monessen)
You must select the log set for this installation.
Do not handle these logs with your bare hands. Always
wear gloves to prevent skin irritation from ceramic fi -
bers. After handling the logs, wash your hands gently with
soap and water to remove any traces of fi bers.
24
CAST IRON GRATE INSTALLATION
Install the cast iron grate by inserting screw head on back
of right side of grate into the "I" shaped slot on front right
corner of unit. After moving screw head to the bottom of the
"I" slot, insert the screw head on the back of the left side of
grate into the keyhole slot on the left front of unit. Figure 24
A.
Key
Hole Slot
Cast Iron Grate
B.
Cast Iron Grate
Figure 24 -
Install Cast Iron Grate
LOG PLACEMENT
I Slot
20307670
- Quick Links:
- Replacement Parts
Hide quick links:
Advertisement
Table of Contents
