For Parallel Interface
Parallel interface connection diagram
This printer is connected to the host computer via the parallel port. When a customer display
(DM-D) is to be connected, connect it to the host computer via the serial port or USB port.
The modular cable is mounted on the cash drawer.
Use the extension cable for power supply bundled with the customer display.
AC adapter + AC cable
DM-D
(Serial I/F model)
Serial cable
DM-D
(USB I/F model)
USB cable
Connecting the parallel interface cable
1
Insert the interface cable connector firmly into the interface connector
on the connector panel.
2
Press down the clips on either side of the connector to lock it in place.
3
When using interface cables equipped with a ground line, attach the
ground line to the screw hole marked "FG" on the printer.
4
Connect the other end of the interface cable to the host computer.
Extension cable for
power supply
Parallel cable
AC adapter + AC cable
Parallel cable
TM-T70II
Modular cable
TM-T70II
Modular cable
Chapter 2 Setup
Cash drawer
2
Cash drawer
47