Power Switch Cover; Control Panel - Epson TM-T70II Technical Reference Manual

Power Switch Cover

Install the power switch cover that comes with the TM-T70II onto the printer to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance
of the printer.
To reset the printer when the power switch cover is installed, insert a long, thin object (such as
the end of a paper clip) into the hole in the power switch cover and press the power switch.
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use may cause fire or shock.
WARNING

Control Panel

Feed button
Pressing this button once feeds the roll paper by one line. Holding this button down feeds the
roll paper continuously.
LEDs
Paper LED (orange)
• Lights when there is little remaining.
• Off when there is a sufficient amount of roll paper remaining.
• Flashes when a self-test is in progress or when macro execution standby state.
Error LED (orange)
Lights or flashes when the printer is offline.
• Lights after the power is turned on or after a reset (offline). Automatically goes out after a
while to indicate that the printer is ready.
18
Feed button
Paper LED
Error LED
(Power) LED