Load Optimal Settings; Load Best Performance Settings; Features Setup Page - ECS P4VMM2 User Manual

use of a second display card installed in a PCI slot.
Allocate IRQ for PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics sys-
tem. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you
to leave this item at the default value.

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you press Y,
and then Enter, the Setup Utility loads a set of fail-safe default values. These
default values are not very demanding and they should allow your system to
function with most kinds of hardware and memory chips.
Note: It is highly recommended that users enter this option to load optimal
values for accessing the best performance.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you press Y,
and then Enter, the Setup Utility loads a set of best-performance default val-
ues. These default values are quite demanding and your system might not
function properly if you are using slower memory chips or other low-
performance components.

Features Setup Page

This page sets up some parameters for those peripheral devices connected to
the system.
AMIBIOS SETUP – FEATURES SETUP
©2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard Game Port
OnBoard MIDI Port
MIDI Port IRQ
OnBoard IDE
Audio Device
Modem Device
Ethernet Device
USB Controller
USB Device Legacy Support
ThumbDrive Support for DOS
Enabled
3F8h/COM1
Disabled
378h
SPP
7
N/A
201h
ESC : Quit
300h
F1 : Help
10
Both
F5 : Old Values (Shift)F2 : Color
Enabled
F6 : Load BIOS Defaults
Auto
Enabled
F7 : Load Setup Defaults
Enabled
Disabled
Disabled
28
↑↓←→ : Select Item
PU/PD/+/- : Modify