Connecting To A Console - Linear PERS-2400 PERSONAL EMERGENCY REPORTING SYSTEM RA-2400 Programming Manual

Ra-2400 remote access software program for personal emergency reporting system

Hide thumbs Also See for PERS-2400 PERSONAL EMERGENCY REPORTING SYSTEM RA-2400:

Table of Contents

5.3

CONNECTING TO A CONSOLE

PURPOSE:

Causes the RA-2400 to connect to the PERS-2400 Console. The

RA-2400 will try to connect to the Console either locally or remotely,

depending on the Communications Setup (see Section 3.3).

NOTE: The Communications Setup can be reviewed by pressing the

COMM SETUP... button in the Send/Receive window.

USER RESPONSE:

NOTE: Before connecting to a Console, it is recommended that all of

the sensors used in the system be entered into the Console's

memory. This will prevent having to connect to the Console again after

programming if modification of the sensor options is required.

BEFORE CONNECTING

Be sure the computer's modem is powered on, connected, and

tested as described in Section 1.5 of this manual.

Check that the Console is powered on.

Be sure that the Account Profile you want to associate with the

particular Console is selected in the "Choose an Account" box.

CONNECT

BUTTON

STATUS

AREA

Table of Contents