Sending And Receiving Data - Linear PERS-2400 PERSONAL EMERGENCY REPORTING SYSTEM RA-2400 Programming Manual

5.4

SENDING AND RECEIVING DATA

PURPOSE:
For transferring data between an Account Profile and a PERS-2400
Console. Also used to monitor Console power and control Activity Timer
status.
CAUTION: Receiving the data from the Console will overwrite the
data in the Account Profile. If you have made changes to the Account
Profile, save the profile, then send the profile to the Console before
receiving the data into the profile. A warning will be displayed when
sending to a Console before receiving. Click OK. This leaves
previously learned sensor information unchanged. If this is a new
Account Profile, its OK to receive the Console data into the new
profile.
USER RESPONSE:
SENDING
!
Click the SEND DATA TO CONSOLE button. The Communications
Status area will indicate the progress and show if the data was
sent to the Console successfully.
NOTE: A warning will be displayed noting that the sensor information
will not be sent if the data has not been received from the Console
first, during this connection. Check the DO NOT SHOW THIS
MESSAGE AGAIN box if you do not want this warning to appear again
during this programming session.
36
SEND
BUTTON