Ovens; The Tall Oven - Rangemaster Professional+ 100 Dual Fuel FSD User Manual

Table of Contents

Advertisement

Fig.5-10
ArtNo.320-0002a Proplus oven door side screws
Fig.5-11
ArtNo.320-0008 Removing the oven lining
Fig.5-12
ArtNo.320-0022 Tall oven side support
Glass Fronted Door Panels
The oven door front panels can be taken off so that the glass
panels can be cleaned. Move the cooker forward to gain
access to the sides (see the 'Moving the Cooker' section under
'Installation').
Open the oven door slightly and remove the front panel
fixing screws from the door sides, two each side (Fig.5-10).
Carefully lift off the outer door panel. The inside face of the
glass panels can now be cleaned – take care not to disturb or
wet the door insulation.
Note: If the door is triple glazed then the inner two panels are
fixed together and should not be separated.
After cleaning, carefully refit the outer door panel and replace
the side fixing screws.
DO NOT use harsh abrasive cleaners or sharp metal
nn
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.

Ovens

'Cook & Clean' Panels
The main oven has panels which have been coated with a
special enamel that partly cleans itself. This does not stop
all marks on the lining, but helps to reduce the amount of
manual cleaning needed.
The Cook & Clean panels work better above 200 °C. If you do
most of your cooking below this temperature, occasionally
remove the panels and wipe with a lint free cloth and hot
soapy water. The panels should then be dried and replaced
and the oven heated at 200 °C for about one hour. This will
ensure the Cook & Clean panels are working effectively.
Do not use steel wool, oven cleaning pads, or any other
materials that will scratch the surface.
Removing the Main Oven Linings
Some of the lining panels can be removed for cleaning. You
will need to remove the shelves before removing the panels.
Each side of the oven is fixed with four fixing screws. You do
not have to remove the screws to remove the oven linings.
Simply lift each side panel upwards and they will slide off the
screws (Fig.5-11). Then pull them forwards.
Once the linings are removed, the oven enamel interior can
be cleaned.

The Tall Oven

To clean the oven sides, slide out the shelves, unhook the
supports from the oven sides, and lift out (Fig.5-12).
14

Advertisement

Table of Contents
loading

Table of Contents