Appearance Description; Front Panel - TP-Link TL-SG2424 User Manual

2.3 Appearance Description

2.3.1 Front Panel

The front panel of TL-SG2216 is shown as Figure 2-1.
The front panel of TL-SG2424 is shown as Figure 2-2.
The front panel of TL-SG2424P is shown as Figure 2-3.
The front panel of TL-SG2452 is shown as Figure 2-4.
The following parts are located on the front panel of TL-SG2216/TL-SG2424/TL-SG2424P/
TL-SG2452:
 Reset: Press this button for five seconds or above to reset the software setting back to factory
default setting.
 10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps,
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED and link/Act LED.
 SFP Ports: Designed to install the SFP module. TL-SG2216/TL-SG2424/TL-SG2424P switch
features some SFP transceiver slots that are shared with the associated RJ45 ports. The
associated two ports are referred to as "combo" ports, which means they cannot be used
simultaneously, otherwise only SFP ports work. TL-SG2452 features 4 individual SFP ports.
Figure 2-1 Front Panel of TL-SG2216
Figure 2-2 Front Panel of TL-SG2424
Figure 2-3 Front Panel of TL-SG2424P
Figure 2-4 Front Panel of TL-SG2452
7