TP-Link TL-SG2424 User Manual page 132

Priority Level

DSCP:
Priority Level:
Configuration Procedure:
Step Operation
1 Configure
relation between the DSCP
priority and 802.1P priority
2 Configure
relation between the CoS and
the TC
3 Select a schedule mode
For TL-SG2452:
The following entries are displayed on this screen
DSCP Priority Config

DSCP Priority:
Indicates the priority determined by the DS region of IP datagram.
It ranges from 0 to 63.
Indicates the 802.1P priority the packets with tag are mapped to.
The priorities are labeled as CoS0 ~ CoS7.
Description
the mapping Required. On QoS→DiffServ→DSCP Priority page,
enable DSCP Priority and configure the mapping
relation between the DSCP priority and CoS.
the mapping Required. On QoS→DiffServ→802.1P/CoS mapping
page, configure the mapping relation between the CoS
and the TC.
Required.
page, select a schedule mode.
Figure 9-8 DSCP Priority for TL-SG2452
Select Enable or Disable DSCP Priority.
On QoS→DiffServ→Schedule
:
124
Mode