Static Multicast Ip - TP-Link TL-SG2424 User Manual

Network Diagram

Configuration Procedure

Step Operation
1 Create VLANs
2 Configure ports
3 Enable
Snooping function
4 Enable Multicast
VLAN
5 Check Multicast VLAN

8.1.6 Static Multicast IP

Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not learned
by IGMP Snooping. It can enhance the quality and security for information transmission in some
fixed multicast groups.
Description
Create three VLANs with the VLAN ID 3, 4 and 5 respectively,
and specify the description of VLAN3 as Multicast VLAN on
VLAN→802.1Q VLAN page.
On VLAN→802.1Q VLAN function pages.
For port 3, configure its link type as Tagged, and add it to VLAN3,
VLAN4 and VLAN5.
For port 4, configure its link type as Untagged, and add it to
VLAN3 and VLAN4.
For port 5, configure its link type as Untagged, and add it to
VLAN3 and VLAN5.
IGMP Enable IGMP Snooping function globally on Multicast→IGMP
Snooping→Snooping Config page. Enable IGMP Snooping
function for port 3, port4 and port 5 on Multicast→IGMP
Snooping→Port Config page.
Enable Multicast VLAN, configure the VLAN ID of a multicast
VLAN as 3 and keep the other parameters as default on
Multicast→IGMP Snooping→Multicast VLAN page.
3-5 and Multicast VLAN 3 will be displayed in the IGMP
Snooping
Snooping→Snooping Config page.
Status table on
104
the Multicast→IGMP