TP-Link TL-SG2424 User Manual page 119

Choose the menu Multicast→MLD Snooping→VLAN Config to load the following page.
The following entries are displayed on this screen:
VLAN Config

VLAN ID:
Router Port
Time:
Member Port Aging
Time:
Immediate Leave:
Static Router Ports:
VLAN Table

Select:
VLAN ID:
Router Port
Time:
Member Port Aging
Time:
Immediate Leave:
Figure 8-13 VLAN Config
Enter the VLAN ID you want to configure.
Aging Enter the router port aging time for this VLAN. It will override the
global configured aging time.
Enter the member port aging time for this VLAN. It will override
the global configured aging time.
Enable or disable immediate leave function for this VLAN. If this
function is enabled, the multicast group member port will be
deleted immediately if Done Message receive, not sending
Specific Query for listener checking.
Enter the static router ports for this VLAN. Static router ports will
not be aged.
Select the VLAN ID you want to change.
Displays the VLAN ID.
Aging Displays the router port aging time of this VLAN.
Displays the member port aging time of this VLAN.
Displays the immediate leave function of this VLAN. You should
only use the Immediate-Leave feature when there is a single
receiver present on every port in the VLAN. If the immediate
leave function is enabled on a port with several listeners in the
same IPv6 multicast group, these listeners will fail to receive the
IPv6 multicast packets after one of them leave this group.
111