Flushing A New Sprayer - Graco TrueCoat 360 Owner's Manual

Common Procedures

Flushing a New Sprayer

This sprayer arrives from the factory with a
small amount of test material in the system.
It is important that you flush this material
from the sprayer before using it for the
first time.
1. Remove cup assembly from the sprayer
by turning counter clockwise and pulling
down.
ti23249b
2. Unscrew cup cover from the cup support.
3. Make certain FlexLiner is in the cup sup-
port.
20
4. Fill FlexLiner with water.
5. Securely tighten cup cover onto cup sup-
port. Align arrow on cup cover within
range of indicator on cup support.
ti23676a
ti24279a
ti23361a
ti23383a
333394F