Uniden DECT1035 User Manual page 20

If...
A handset is not
working.
A handset says
Unavailable.
No handsets display
Caller ID information.
I can't transfer calls.
(multi-handset packs
only)
Two handsets can't talk
to the caller. (multi-
handset packs only)
The answering system
does not work.
The system won't
record messages.
A handset can't access
the answering system.
My outgoing message
is gone.
I can't hear the base
speaker.
Messages are
incomplete.
20
Try...
- Charging the battery for 15-20 hours.
- Checking the battery connection.
- Moving the handset closer to the base.
- Seeing if another handset is in Privacy Mode.
- Letting calls ring twice before answering.
- Making sure your Caller ID service is active.
- You may have to reset the handset. Contact
Customer Service for instructions.
- Making sure no handset is in Privacy Mode.
- Making sure the answering system is on.
- Making sure the base is plugged in.
- Making sure the Record Time is not set to
Announce Only.
- Deleting messages (memory may be full).
- Seeing if another handset is using the system.
(multi-handset packs only)
- Making sure the phone is in standby.
- If there was a power failure, you may have to
re-record your personal outgoing message.
- Making sure call screening is turned on.
- Changing the base speaker volume.
- The incoming messages may be too long.
Remind callers to leave a brief message.
- Deleting messages (memory may be full).