Table of Contents
Advertisement
Use this menu to set the clock manually. (If you have Caller ID, the
Day & Time Menu
phone sets the day and time from the CID data.) Select the day of week,
then use the number keypad to enter the hour and minutes in HHMM
format (e.g., enter 0345 for 3:45). Then, select AM or PM.
The settings on this menu affect all handsets. Only one handset at a
Global Setup Menu
time can change these menu options.
Insert 0
VMWI Reset
Use the 12-key dial pad when you want to enter text into your phone
Entering Text on Your Phone
(a name in the phonebook, the handset banner, etc.).
The phone defaults to a capital letter for the first letter and any
letter after a space; otherwise, it uses small letters.
To switch to all capital letters, press
capital letters first (e. g. ABCabc2) until you enter a blank space or
press
again. (Any time you want to change case, just press
If two letters in a row use the same number key, enter the first
*
letter and wait a few seconds (or press
move to the next space. Enter the next letter.
Press
to enter a blank space.
To change a letter, move the cursor to that letter and press
#
to erase the letter. Then, enter the new one.
To erase the entire entry, press and hold
Press
to cycle through all available symbols and punctuation.
0
Adds "0" or "00" to the beginning of the number
received from Caller ID. The default setting is ON for
New Zealand and OFF for Australia.
Reset your Visual Message Waiting Indicator to
bring it back in sync with your voice mail service.
. The phone defaults to all
*
); the cursor will
RigHT
.
ClEaR
.)
*
ClEaR
9
Advertisement
Table of Contents
